NASYN E Series
APPLICATIONS
● Oil flooded rotary screw compressors
● Oil flooded rotary vane compressors
● Axial and centrifugal compressors
● Rreciprocating compressors
● Lubrication with Biodegradability is required
CHARACTERISTICS
● Eliminates compressor lacquering, reduces maintenance
● Long life, reduced oil changes
●Wide application range
● Fluid at low temperatures
● Stable at high temperatures
● High flash point, improve safety
● Based on a biodegradability synthetic ester which meets CEC L-33-A-94 biodegradability requirements of greater than 80% (mineral oil is typically 20-25%)
TYPICAL PROPERTIES:
|
PROPERTY |
|
TYPICAL RESULTS |
||||
|
E-22 |
E-32 |
E-46 |
E-68 |
E-100/150 |
||
|
|
ASTM D-445 |
19.9 |
34.3 |
48.4 |
64.8 |
139.9 |
|
|
ASTM D-445 |
4.5 |
6.1 |
7.8 |
9.1 |
13.1 |
|
Pour Point, °C |
ASTM D-97 |
-60 |
-51 |
-49 |
-46 |
-34 |
|
Flash Point, °C |
ASTM D-92 |
220 |
252 |
271 |
266 |
299 |
|
Specific Gravity |
ASTM D-1298 |
0.99 |
0.99 |
0.99 |
0.99 |
0.99 |
COMPATIBILITY
These products are compatible with most currently used compressor components including seals, paints, and plastics.
However, some materials not recommended include neoprene, styrene, and polycarbonate.
The following paints, plastics, and seal and hose materials are recommended for use with our ester-based synthetic lubricants. Materials not recommended are also shown. For additional information, see our "Compatibility Guide ".
RECOMMENDED - Viton, high Nitrile Buna N, Teflon, nylon, Delrin, Celcon, PBT, epoxy paint, oil-resistant alkyd paint.
NOT RECOMMENDED - Neoprene, low Nitrile Buna N, SBR rubber, polystyrene, PVC, ABS, lacquer, acrylic paint.
