Ezgrea PU - Preformed Polyurea Thickener Powder
|
lNon-hazardous and environment-friendly lDoes not require special facilities for storage and shipment lEasy to handle lSimple and cost-effective production of polyurea greases lHigh production efficiency and energy saving lZero disposalhazardous materials lIncrease your product portfolio by Standard grease manufacturing equipment (without additional investment)
|
lPolyurea grease manufacturing |
|||
|
TYPICAL PERFORMANCE DATA of polyurea grease produced with Ezgrea PU |
||||
|
|
||||
|
PROPERTY |
TEST METHOD |
TYPICAL RESULTS |
|
|
|
Thickener Treat rate (wt %) |
--- |
12% of Ezgrea PU |
|
|
|
Base Oil |
--- |
500SN |
|
|
|
NLGIGrade |
--- |
2 |
|
|
|
Penetration (0.1mm(work 60 strokes) |
ASTM-D 217 |
280 |
|
|
|
Penetration prolonged (work 105strokes, 0.1 mm) |
ASTM-D 217 |
340 |
|
|
|
Dropping point,℃ |
ASTM D-566 |
310 |
|
|
|
Corrosion (T2copper, 100℃,24h) |
Pass |
|
||
|
Oil Bleeding ( 100℃,24h) |
ASTM D6184 |
0.6 |
|
|
|
|
Nasyn Group Inc. 206-887 Bay Street,Toronto ON M5S 3K4Canada
Tel.: (416) 800 4496 Fax: (416) 800 2983 Email:francis.hou@nasyn.com Website:http://en.nasyn.com |
|||
|
EQUIPMENT EMPLOYED AND TREAT RATE RECOMMENDATION |
||||
|
lEzgrea PUworks in standard grease manufacturing equipment (no reactor needed): nVessel for stirring and heating up to 180°C nRoller Mill, High Pressure Homogenizers. lEzgrea PU treat rate recommended: NLGI Grade 0 1 2 3 Ezgrea PU treat rate (wt %) 5-7 9-11 12-15 16-19Note: recommendation above is based on 500SN base oil. Final NLGIgrades may vary with specific base oils’ viscosity and additive performance as well as production operation. It is recommended to make adjustment for a specific grease production based on requirements. |
||||
Typical properties should not be considered specifications. This information is furnished without warranty, representation, inducement, or license of any kind, except that it is accurate to the best of OUR knowledge or obtained from sources believed by NASYN to be accurate. NASYN does not assume any legal responsibility for use of reliance upon it.
